We are here to help you with Artisan Science, our moto is Learning by Doing and Being. (Le – Do – Be). The tools here are listed for those who are interested to make their own Mineral Crystal Particles (MCPs) in plasma water. I offer you Three Levels to build up your own experience and become a freelancer and I will guide step by step trough the process to understand what you need and how far you want to go in this learning.
If you have opened this page it means you are interested to start making your own liquid plasma materials and you want to understand what you need to produce Mineral Crystal Particles (MCP’s).
Zinc, Copper, Magnesium, Iron
Different types and grades of MCPs plasma waters
Colloidal Silver, Ruby Gold, Graphene and plant wort extracts in plasma water.
This Mineral Crystal Particles production method is based on electrolysis to obtain different chemical compounds and one of the main electrodes used in this process is Carbon Stick or graphite rod as electrode. Read more about Carbon Stick Method here.
It includes are basic tools you will need to produce any of your MCP’s in
ALL of these THREE LEVELS.
I suggest this graphite stick with dimension (5x200mm) for several practical reasons, but you can use any other size juts note that you have to think about proportions of your system. Click here to order it.
5. DISTILLED WATER:
Clean water is needed to avoid any other element contamination in your production. Tape water contains a lot of bacteria’s, metal and nonmetal ions that can change result of your production. Water is our base of plasma so you need it as better as you can get! Make sure water is at pH range 7-8. Distilled water is at this pH range!
6. PURE TABLE SALT NaCl
Many table salts have other elements in it. Especially unrefined sea salt. So please make sure that the salt is 100% pure (lab grade)
Glass jar - Borosilicate jars are heat resistance glass recommended, household jars also could be used if it is the only option. Please avoid sharp temperature changes because it can broke very easy. I do not recommend using any plastic as it could release some extra ions in solution. You can notice difference of water kept in plastic and glass bottle, glass is standard choice in any scientific lab. Buy here.
Kitchen pad (green scrub) for cleaning the electrodes and clean your tools.
11. HOUSEHOLD CHEMICALS FOR CLEANING
White vinegar (8% )for cleaning and preparing the electrodes including glass jar. Baking soda (NaHCO3) powder, Sodium bicarbonate to react with white vinegar after the cleaning the electrodes. Paper towels to clean excess water and give a shine to electrodes. Strong alcohol (70-95%) and microfiber clothe for cleaning and disinfection of the tools.
Protection glows while you are working. Good ventilated are. Most basic works can be done in a kitchen. Somewhere is clean place and access to running water and pour wastewater.
In advance level you can make variation of MCP’s types and different grades.
You can start directly in this level and skip the basic level if you have already some experience with carbon stick method. Now you can master much more and up to your own choice. It sounds more complicated then it is. You can learn step by step on our pages about each MCP’s type and grade.
In ADVANCED LEVEL you need all tools included in BEGINNER LEVEL and PLUS
pH meter is need to check the pH of water and understand how to use it as an adjustment tool to achieve better results. The pH meter is one of my basic tools I use daily and is one of the most important to be in charge of the process.
My preferred pH meter is fast and easy to use with waterproof sealant, buy here.
13. ADDITIONAL HOUSEHOLD CHEMICALS
Hydrochloric acid (diluted HCl 23-30%).
14.MAGNETIC STIRRER WITH MAGNETS
Magnetic Stirrer is recommended for best results! It helps to keep particles separated into water, to avoid big cluster formation and gives more oxygen to solution.
15.AQUARIUM AIR PUMP
Aquarium air pump is easiest way to induce more oxygen in solution during the electrolysis. For example it is very important to make MCPS’s rich with oxygen as Iron Oxide (Fe2O3).
16.DC POWER SUPPLY
DC power supply 30V /1A (highly recommended). It allows control the speed of production and particles size.
17.STAINLESS STEEL STRAINER
Stainless steel tea strainer to separate big pieces separated from electrodes or clusters from solution, it also will be used later to sieve the powder.
Brown coffee paper filter (Melitta size 4) around 20μm pore size or slow filter paper (2,5μm) pore size. If you want to be in charge of the particles size then you will need it.
Work with plants to make wort extracts for plasma water preparation. To master different colloidal plasma waters, such as ruby gold, silver, zinc, copper, iron etc.
Your purchases are donations and research contribution for to ''Liquid Plasma Feeding'' research and experiments in natural supplement extraction methods and new approach of use of nature-based plasma energies in the modern world of nanotechnologies. Our aim is to develop technologies as greenest possible, fewer chemicals and with little energy in use to find best solutions for the future humanity of our dear planet Earth.
Thank you very much for your confidence and support.
We are sharing our knowledge experience and experiments in our blog posts and Facebook page, we also invite you to join our private artisanal scientific research public group to participate in discussions and share your own experiments.